All of our Rife machines are checked at our testing facility for the following characteristics:    

^{(Each unit comes with  hard copy of these tests results)}

FREQUENCY ACCURACY

     Our frequency generators are all checked before leaving the factory for accuracy.  You can be sure that the frequency that it shows is the frequency that you are transmitting.

WAVEFORM ACCURACY

    To get the appropriate effect, the proper waveform must be generated.  This requires a certain type of amplifier which will pass the original square wave without distortion, clipping or bias.  Each unit comes with a printout of the waveform it produced as the energy left the tube.

POWER OUTPUT AND RF FIELD STRENGTH

    Our Rife machines are capable of 150 watts of forward power, more than any other Rife machine on the market today.  Our antennas are 95%+ efficient as opposed to the 1% to 3% efficiency of tube type devices.  Thus our 150 watts is more than 10 times as powerful as a 300 watt tube device.  The option of higher power gives the practitioner the ability to apply the Rife effect to large groups of people simultaneously.  Also, in the case of  aggressive cancers or cancers where survival time is limited and time is of the essence, greater power may be preferable.

    RF field strength is measured in watts at 3 feet, 6 feet, 9 feet, 12, feet and 15 feet with our field strength meters, so you can better calculate the proper exposure time at various distances.

LINE CHARACTERISTICS

    Line impedance, inductance and capacitance must be within certain values for optimal effect.  Each unit is specially calibrated at our factory using RF line analysis equipment to insure a well tuned system.