What are the Real Rife Frequencies

     Our rife machines are the only rife machines on the market to actually generate Rife's original frequencies.  This may sound like an outlandish claim, but we are prepared to back it up.  To understand why this is so, we will have to go back to the 1930's and to Rife's original lab notes.

     When Rife originally made his machines, they used gas tubes that were old X-rays tubes that had been filled with helium neon and or argon.  These tubes emitted, Rife's frequencies, light, and X-rays.   

     Here is a picture of one of these old tubes.  Rife's treatment for cancer was 3 minutes every 3rd day for one month, and the cancers were gone.

     The question to ask is why was Rife able to cure cancer in ten 3 minute sessions, when with current "rife machines"  it can take 2 hours a day for 3 months, and still achieve only a partial remission?

There are 2 reasons that Rife's original worked better that current models.

1) Rife's machines produced X-rays, and X-rays will definitely carry a signal into the body, but at a cost.  These tubes were designed with 45 degree electrodes (like a modern phanotron tube) to make X-rays.  Modern tubes use parallel electrodes, set at a distance, and leaded glass to prevent X-rays from being formed or escaping the tube.  While we do not condone the use of X-rays because of the radiation side effects, they did increase the power of the early machines.

2) Rife's original frequency for cancer is NOT BEING USED TODAY!!!  This is the real shocker.  Here is a copy of Rife's lab notes in his own hand for his experiments with cancer.  In the bottom right hand corner you will see the frequency as 11,780,000 hertz. It will take a while to download due to its large size. 

Click on the photo to enlarge it.

Everyone who is making Rife machines today is using the wrong frequencies....How could this happen?

     A man named Chrane worked with Rife as an engineer for a few years and then split off to make his own machines.  Chrane thought that rather than transmit the frequencies to the body with a tube, he could send them electrically through electrodes placed at the hands and feet.  Of course he couldn't use Rife's frequencies because Rife's frequencies were from 300,000 to 12 million and theses high frequencies sent though electrodes would cause terrible burns.  So he came up with his own set of frequencies.  These frequencies were from 20 to 2489 hertz.  These are Chrane frequencies.

  Many people bought these electrode Chrane devices thinking that they were getting Rife machines for years.  While these machines do work to some extent, they cannot affect the entire body like a tube device, but only work near where the electrodes are placed.  Since cancer  often metastasizes without the patient knowing it, using electrode devices on the tumor site may miss another tumor elsewhere in the body.  For this reason, we do not use pad/electrode devices.

     Next came a series of researchers who said, wait, Rife never used electrodes, he used gas tubes, let's use gas tubes.  And so, the next generation of "Rife machines" were built.  These used a Rife style tube (without the X-rays) and Chrane frequencies.  Good results were found, but no one has achieved the kind of success that Rife originally had.  They failed because they never used Rife's original frequencies.

     The way that these machines are built, it is impossible for them to generate Rife's original frequencies (for technical reasons that will not be explained here).

     So, seeing that no one was using Rife's original frequencies, were decided to build units that would both allow for the Chrane frequencies that everyone was using, as well as the original Rife frequencies.

Rife and Chrane frequencies compared

     There are some frequencies that Chrane has that Rife never found, like 465 for Candida and fungus.  There are some frequencies that Rife had that Chrane never discovered, like 900,000 for anthrax.  Then there are frequencies that both Rife and Chrane have like cancer, which is 2127 for Chrane, and 11.780,000 for Rife.  These frequencies are so far apart that they have obviously discovered 2 entirely different ways to kill the cancer microbe. 

So which should you use?   Use Both!!! 

     For instance with, Candida, you must use Chrane.  This is not to say that no Rife frequency exists, only the Rife never looked for one.

     In cases where there is only a Rife frequency, for instance with, influenza, use the Rife frequency.   This is not to say that no Chrane frequency exists, only the Chrane never looked for one.

     In case where there are both Rife and Chrane frequencies, for instance with carcinoma, USE BOTH.  Of course, the higher a frequency is, the more power it can deliver, so a Rife frequency at 11.78 million will always be stronger than a Chrane frequency of 2127 (5535 times stronger to be exact).  Still, they are affecting different aspects of the microbe, use both and blast the cancer microbe from both directions.